Articles
- Home
- Resources
- Articles
Articles
When Material and Labor Costs Rise, Does Welding Automation Still Pencil Out?
Yes, the math actually gets better, not worse. Rising material and labor costs don’t change the cost of buying welding automation. What they change is the cost of everything you’re currently doing without it: scrap from a bad weld, rework hours, and the output you’re not getting from the labor
Will Automation Fix Your Welder Shortage? An Honest Answer
No, not by itself, and anyone who tells you otherwise is selling something. Automation doesn’t make the welder shortage disappear. What it actually does is support and empower the welders you already have, redeploying them toward the work that needs them most, while creating a different kind of opening, one
Who’s Responsible When Your Weld Cell Goes Down? The Case for Single-Source
With a single-source system, one company is responsible when something breaks: whoever designed, built, and sold it to you, full stop. That answer gets a lot murkier on a weld cell assembled from multiple vendors. Is it the robot manufacturer, the integrator, the power source supplier, the fixture builder? Each
What Makes a Part Hard to Weld With a Robot? A Welder’s Read
A print will show you the dimensions. It’ll show you the tolerances, the material spec, the joint callouts. What it won’t show you is how the part is actually going to behave once heat hits it, whether the fit-up will hold steady from the first piece to the hundredth, or
“Start Small and Expand”: What a Smart First Automation Step Actually Looks Like
The best way to start with welding automation is to pick one part, not your whole shop. Choose a single part or a small family of similar parts that runs regularly and has a clear problem worth solving, prove it out, then expand from there. That is not a compromise.
CLOOS Appoints Roberto Nicoli as President of CLOOS Americas
Schaumburg, IL, July 10, 2026 – The CLOOS Group is pleased to announce the appointment of Roberto Nicoli as President of CLOOS Americas. In his role, Roberto will lead the company’s operations and drive strategic growth across North and South America. This leadership structure brings CLOOS’ North and South American
How Much Does a Robotic Welding Cell Cost in 2025?
“How Much Does a Welding Robot Cost?” – The Most Common, Yet Most Misunderstood Question in Automation If you’re exploring robotic welding for your operation, whether you’re an agricultural equipment builder in Iowa or a trailer fabricator in Ontario, you’re asking the same thing: “What’s this really going to cost
Certification’s Edge: Strengthening Operator Skills in Welding Automation
Where Skill Meets Technology You’ve invested in welding automation, whether it’s your first robot or you’re expanding a full cell. That’s a big step forward. But the real gains don’t come just from buying the right system, they come from building the right team around it. We asked our network
Why Hands-On Experience Wins in Welding Automation Training
When it comes to training operators for welding automation, the message from our LinkedIn audience was clear: hands-on experience is king. In a recent poll, 46% of respondents ranked hands-on training as the most critical factor in preparing operators for automation success. Welding knowledge followed closely—another key component that can’t
Designing for Automation: How Tooling Impacts Workflow, Quality, and ROI
In today’s fast-paced manufacturing world, automation isn’t just a luxury—it’s a necessity. But here’s the kicker: automation is only as good as the tooling behind it. Effective tooling design isn’t just about holding parts in place; it’s about driving efficiency, improving quality, and maximizing ROI. Especially when it comes to
When Material and Labor Costs Rise, Does Welding Automation Still Pencil Out?
Yes, the math actually gets better, not worse. Rising material and labor costs don’t change the cost of buying welding automation. What they change is the cost of everything you’re currently doing without it: scrap from a bad weld, rework hours, and the output you’re not getting from the labor
What Nippon Steel’s U.S. Steel Buy Means for Welding Automation
The steel market just shifted. If you’re running a shop that bends, cuts, or welds anything structural, this deal affects you. Here’s what to watch, and what to do next. The Deal: A $15 Billion Buy and $11 Billion in Upgrades Nippon Steel’s $14.9 billion acquisition of U.S. Steel comes
Overcoming the Top Challenges in Automating Welding Operations
The welding industry is evolving, but significant challenges remain as companies explore automation to enhance their operations. Recently, we conducted a LinkedIn poll to understand the biggest barriers to automating welding processes. The results highlighted two key challenges: skilled labor shortages and integrating automation with existing systems, each garnering 33%
Choosing the Right Robotic Welding Partner: Why Service and Support Matter Most
In today’s manufacturing landscape, investing in a robotic welding solution is a significant decision. It’s about selecting a partner that not only delivers advanced welding technology but also offers ongoing support to keep operations running smoothly. According to a recent LinkedIn poll conducted by CLOOS North America, over 70% of
Why the Future of Robotic Welding Won’t Stay Inside the Box
For decades, robotic welding meant one thing: a fixed cell with a fixture inside and a robot bolted to the floor. That model worked. It still does. But if you’re welding long, heavy, or high-mix parts, you’ve likely run into its limits. Manufacturers today are moving past the traditional setup.
Newsletter
Sign up for the CLOOS newsletter to receive the latest news in welding technology, upcoming events, and more.